When The Energy Saver Indicator Is On
The copier is in the Energy Saver
or Auto Off mode.
Press the
Clear Modes/Energy
Saver
key to return to the ready
condition.
S
For details about Energy Saver,
see pages 85 and 124.
S
For details about Auto Off,
see
page 125.
S
The following actions will also make the copier ready:
ù Opening or closing the platen cover.
ù Opening or closing the optional document feeder.
ù Setting originals in the optional document feeder.
ù Opening or closing the bypass feed table.
ù Setting copy paper in the bypass feed table.
ù Pressing any key except the Start key.
When The Copier Is Set For User Codes
Input your user code (3 digits)
using the
Number
keys. Press
the
Recall/Enter
key.
S
To prevent others from making cop-
ies using your user code, press the
Clear/Stop and Clear Modes/En-
ergy Saver key simultaneously after
copying.
S
Regarding user codes,
see page
132.
S
To set your copier for user codes,
contact your service representative.
See page 140.
f-eu-5
1
4
7
2
5
8
0
3
6
9
R/#
C
STARTING THE COPIER
39
To Next Page
Loading...
