Ricoh Aficio FT4027 - SADF Auto Reset

20. SADF auto reset
When you set one original at a time in the optional document feeder, the
Auto Feed
indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. You can adjust this
time.
S
For how to change settings,

see page 119.
Default: 5 seconds (Setting: 5)
Setting Definition
1 1 second
~~
99 99 seconds
21. ADF free size
With the default setting, you cannot use originals of different size when you
set originals in the optional document feeder. You can cancel this setting.
S
When you make one-sided copies from one-sided originals using this function,
the copying speed will be reduced.
S
For how to change settings,

see page 119.
Default: No (Different sized originals cannot be used.) (Setting: 0)
Setting Definition
0 No (Different sized originals cannot be used.)
1 Yes (Different sized originals can be used.)
22. Thick/Thin original mode selection
In thin original mode, thin originals (lighter than 52 g/m
2
) are not damaged
when being fed into the optional document feeder. With the default setting,
this mode is not selected.
S
For how to change modes,

see page 119.
Default: No (Thin paper mode is not selected.) (Setting: 0)
Setting Mode
0 No (Thin paper mode is not selected.)
1 Yes (Thin paper mode is selected.)
f-eu-7
USER TOOLS
130