With 1000-sheet large capacity tray and unit for two-sided
copying:
Default: Large capacity tray (Setting: 5)
Setting Paper tray
11st tray
2 2nd tray
,
33rd tray
,
44th tray
,
5 Large capacity tray
,
These paper trays are not always equipped with your copier, depending on the
kind of optional paper tray unit you have, if any.
See page 108 for the
position of each paper tray.
3. APS priority selection
As a default setting, Auto Paper Select is on. You can cancel this setting.
S
For how to change modes,
see page 119.
Default: Yes (APS priority is selected) (Setting: 1)
Setting Mode
0 No (APS priority is not selected.)
1 Yes (APS priority is selected.)
4. Auto APS select (DF)
As a default setting, the Auto Paper Select is selected when you set
originals in the optional document feeder. You can cancel this setting.
S
For how to change modes,
see page 119.
Default: Yes (Auto APS is selected.) (Setting: 1)
Setting Mode
0 No (Auto APS is not selected.)
1 Yes (Auto APS is selected.)
f-eu-7
USER TOOLS
122
To Next Page
Loading...
