SETTING A STACK OF ORIGINALS IN THE
OPTIONAL DOCUMENT FEEDER
You can insert a stack of originals (one-sided or two-sided) of the same size
into the document feeder. These originals are individually fed onto and
removed from the exposure glass.
S
If you want to set originals of different sizes at the same time, use the user tools.
See page 130.
1
.
Correct any curl, fold, or crease
in the originals before setting.
2
.
Confirm that the
Insert Original
indicator is lit before setting the
originals.
3
.
Confirm that no previous originals
remain on the exposure glass.
4
.
Adjust the guide to the original
size.
5
.
Set the originals
face up
into the
document feeder until the
Insert
Original
indicator goes off.
S
The last page should be on the bot-
tom.
S
The guide must touch the front side
of the originals.
f-eu-4
SETTING A STACK OF ORIGINALS IN THE OPTIONAL DOCUMENT FEEDER
32
To Next Page
Loading...
