SETTING ONE ORIGINAL AT A TIME IN THE
OPTIONAL DOCUMENT FEEDER
You can insert one original at a time into the document feeder. The original
is automatically fed onto and removed from the exposure glass.
1
.
Correct any curl, fold, or crease
in the originals before setting.
2
.
Confirm that the
Insert Original
indicator is lit before setting the
originals.
3
.
Confirm that no previous originals
remain on the exposure glass.
4
.
Adjust the guide to the original
size.
5
.
Set the original
face up
into the
document feeder until the
Insert
Original
indicator goes off.
S
If you are copying a stack of originals
one sheet at a time and you want to
keep them in order, start with the last
page of the originals.
S
The original guide must touch the
front side of the original.
f-eu-4
SETTING ONE ORIGINAL AT A TIME IN THE OPTIONAL DOCUMENT FEEDER
34
To Next Page
Loading...
