3
Make sure that the
Bypass
Feed
indicator is lit. If it is not lit,
press the
Paper Selection
key to
select the bypass feed table.
4
Slide the paper guides to the pa-
per width and, if necessary,
swing out the extender to support
large size copy paper.
5
Insert the copy paper into the by-
pass feed table.
S
Approximately 40 sheets of copy pa-
per (80g/m
2
) can be inserted at a
time.
S
Do not insert copy paper after the
Load Paper ( ) indicator turns off.
6
Press the
Start
key.
f-eu-5
FREQUENTLY USED FUNCTIONS
46
To Next Page
Loading...
