With the optional document feeder
1
Press the
Interrupt
key. The cop-
ier will stop the copy run and
store the present settings in the
memory. The original on the ex-
posure glass will exit from the
document feeder. The copier will
return to the ready condition.
2
Take the originals from the exit
stack.
3
Separately take the remaining
originals off the original table.
4
Make your copies.
5
After interrupt copying is com-
pleted, press the
Interrupt
key.
The copier will recall the previous
copy settings.
6
Some originals in the exit stack
(step 2) weren’t completely cop-
ied. Read the number in the
Three Digit
indicator and take
that number of pages from the
top
of the exit stack.
7
Place the sheets you just took on
the bottom of the stack you took
from the original table (step 3).
8
Place the stack you just made in
the original table.
9
Press the
Start
key.
f-eu-5
m
%
FREQUENTLY USED FUNCTIONS
48
To Next Page
Loading...
