2
Set the OHP transparencies in
the bypass feed table.
S
You can set ten sheets at a time.
However, if misfeed or multi-feed oc-
curs, feed one sheet at a time.
S
OHP transparencies should be
fanned to get air between the sheets
before loading.
3
Press the
Cover/Slip Sheet
key
to light the
OHP Slip Sheet
indi-
cator.
4
Using the
Paper Selection
key,
select the paper tray where you
have set the slip sheets (step 1).
5
Set your original on the exposure
glass or in the optional document
feeder.
See page 31, 32, or
34.
6
Press the
Start
key.
f-eu-5
1
2
mm
i10Key { j
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
65
To Next Page
Loading...
