Connecting the Machine
24
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.46 “Interface Settings”
p.53 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Necessary
Interface Settings/Network IPv4 Gateway Address Necessary
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communictn. As required
Interface Settings/Network Permit SSL/TLS Comm. As required
Interface Settings/Network Host Name As required
Interface Settings/
IEEE 802.11b
Communication Mode Necessary
Interface Settings/
IEEE 802.11b
SSID Setting As required
Interface Settings/
IEEE 802.11b
Channel As required
Interface Settings/
IEEE 802.11b
Security Type As required
Interface Settings/
IEEE 802.11b
Communication Speed As required
File Transfer Default User Name/PW(Send) As required
To Next Page
Loading...
