Registering Fax Information
89
4
Note
❒ You can register "Own Name" using up to 20 alphanumeric characters and
symbols.
Reference
"Entering Text", About This Machine
Programming/Changing Own Fax Number
A Select [Own Fax Number] using {U} or {T}, and then press the {OK} key.
B Enter the source fax number using the number key, and then press the {OK}
key.
To change the programmed source fax header, press the {Clear/Stop} key, and
then enter again.
When you enter "+" and space, press [n], [Space] for each.
If you make a mistake, press the {Clear/Stop} key, and then enter again.
Note
❒ You can register "Own Fax Number" using up to 20 numbers, space, and
"+" symbol.
To Next Page
Loading...
