• PCL 6
D:\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
• PostScript 3
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
The PCL6 printer driver is installed in the language specified by your operating system.
7. Check the printer driver location, and then click [Next >].
8. Click [Continue].
9. Click [Finish].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the
[Printers and Faxes] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
•
The number after "USB" varies depending on the number of printers connected.
1. Preparing the Machine
32
To Next Page
Loading...
