• Duplex printing is not possible if the paper types listed below are specified. If you want to perform
duplex printing, select a paper type other than those listed below:
•
Paper loaded in the bypass tray
• Thick Paper, OHP (Transparency), Label Paper
• Custom Size paper
For the PCL 6 printer driver:
1. After creating a document, open the Printing Preferences dialog box in the document's
native application.
The [Printing Preferences] dialog box appears.
2. To use an existing One Click Presets, click the [One Click Presets] tab, and then click the
icon in the [One Click Preset List:] box.
If you do not wish to modify a custom setting that is already registered in the printer driver, change
settings such as paper size and source tray as required, and then proceed to step 8.
3. Click the [Detailed Settings] tab.
4. In the [Menu:] box, click the [Edit] icon.
5. In the [2 sided:] list, select [Open to Left] or [Open to Top].
6. Change any other print settings if necessary.
7. To save current setting in the One Click Preset List, click [Register Current Settings...].
Enter a name and comment that describe the setting, and then click [OK].
The newly registered icon appears in the [One Click Preset List:] area.
8. Click [OK] to close the printer preferences dialog box.
9. Print the document using the print function in the document's native application.
For the PCL 5e printer driver:
1. After creating a document, open the Printing Preferences dialog box in the document's
native application.
The [Printing Preferences] dialog box appears.
2. Click the [Setup] tab, if it is not already selected.
3. In the [Duplex:] list, [Open to Left] or [Open to Top].
4. Change any other print settings if necessary.
5. Click [OK] to close the printer preferences dialog box.
6. Print the document using the print function in the document's native application.
• If the document contains pages with different original sizes, page breaks may occur.
Frequently Used Print Methods
59
To Next Page
Loading...
