Placing Originals
17
1
Custom sizes
When placing custom size originals on the exposure glass, or in the ADF or AR-
DF, specify the size of the originals using the number keys.
Important
❒ Originals that have a vertical length of 105–297 mm (4.2"-11.6") and a horizon-
tal length of 128-1,260 mm (5.1"-49.6") can be specified.
A Select a desired paper tray using {U} or {T}.
B Press the {q} key.
C Select [Custom Size] using {U} or {T}, and then press the {OK} key.
D Enter the horizontal size of the original (Horiz.) with the number keys, and
then press the {OK} key.
1 Vertical size
2 Horizontal size
ARB009S
To Next Page
Loading...
