Copying
56
2
Note
❒ An optional ARDF is required to scan 2-sided originals.
❒ To cancel the Two-Sided Combine function in step
A
, press the {Com-
bine/Series} key again. Make sure the indicator goes off.
❒ To display the screens in steps
C
and
D
, select [Always Specify] for [Orienta-
tion] with Copier Features in User Tools. If [Do not Specify] is selected, pro-
ceed to step
E
.
Reference
“Orientation”, General Settings Guide
Series Copies
You can separately copy the front and back of a two-sided original or two facing
pages of a bound original onto two sheets.
Important
❒ See the following table for original and paper sizes when using a 100% ratio
with the Book→1 Sided function.
❖ Metric version
❖ Inch version
❒ You cannot use the Book→1 Sided function from the ADF or ARDF.
❒ You cannot use the bypass tray with the Book→1 Sided function.
Original Paper for 1–sided copy
A3L A4K × 2 sheets
B4 JISL B5 JISK × 2 sheets
A4L A5K × 2 sheets
Original Paper for 1–sided copy
11" × 17"L
8
1
/
2
" × 11"K × 2 sheets
8
1
/
2
" × 11"L 5
1
/
2
" × 8
1
/
2
"K × 2 sheets
To Next Page
Loading...
