Copy Functions
45
2
B Select the paper size using {U} or {T}.
C Place the originals, and then press the {Start} key.
The machine automatically selects an appropriate ratio and then begins copying.
Reference
p.10 “Sizes difficult to detect”
Sort
The machine assembles copies as sets in sequential order.
Important
❒ To use the Rotate Sort function, two paper trays loaded with paper of the
same size and type, but in different orientation (KL), are required. See “Pa-
per Type: Tray 1-4”, General Settings Guide.
❒ You cannot use the bypass tray with Rotate Sort.
❖ Sort
Copies are assembled as sets in sequential order.
❖ Rotate Sort
Every other copy set is rotated by 90 degrees (KL) and delivered to the copy
tray.
To Next Page
Loading...
