59
3. Appendix
Combination Chart
This chapter describes the copy machine's specifications and the function compatibility.
The combination chart given below shows which modes can be used together.
Blank : These modes can be used together.
× : These modes cannot be used together. The first mode selected will be the
mode you are working in.
: These modes cannot be used together. The second mode selected will be the
mode you are working in.
The following shows the combinations of functions.
*1
Originals that are 433 mm or longer cannot be used with the two-sided original function.
*2
This combination is not available on paper that is 433 mm or longer.
*3
An error message appears if you specify these combinations. You cannot make cop-
ies until one of the functions is canceled.
*4
Auto Reduce/Enlarge can be set if the Combine function is selected first.
ARB001S
To Next Page
Loading...
