7
3. Setting Up the Machine on
a Network
User Tools Menu (Interface Settings)
This section describes the network settings you can change with User Tools (In-
terface Settings). Make settings according to functions you want to use and the
interface to be connected.
Important
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Reference
For details about settings, see p.9 “Settings You Can Change with User Tools”
❖ Viewing the Information Displayed in the List
$ These items must be set to use the function. Be sure to set them before at-
tempting to use the corresponding function.
❍ These items must be set if required.
Printer
*1
Check [Effective] is selected for TCP/IP.
Network TWAIN Scanner
*1
Check [Effective] is selected for TCP/IP.
Settings
Interface Settings/Network
See p.9 “Interface Settings”.
IP Address $
Gateway Address ❍
Effective Protocol
*1
$
Ethernet Speed ❍
Settings
Interface Settings/Network
See p.9 “Interface Settings”.
IP Address $
Gateway Address ❍
Effective Protocol
*1
$
Ethernet Speed ❍
To Next Page
Loading...
