User Tools Menu (Interface Settings)
9
3
Settings You Can Change with
User Tools
Interface Settings
❖ IP Address
Before using this machine in the
network environment, you must
configure the IP address and sub-
net mask.
•Auto-Obtain (DHCP)
•Specify
When you select [Specify], enter
[IP Address:]and [Sub-net Mask:]
as “xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
• IP Address: 011.022.033.044
•
Sub-net Mask: 000.000.000.000
Note
❒ Default: Auto-Obtain (DHCP)
❒ When you select [Specify], be
sure not to set the same [IP Ad-
dress:] as that of another ma-
chines on the network.
❒ The physical address (MAC ad-
dress) also appears.
❖ Gateway Address
A gateway is a connection or inter-
change point between two net-
works. Configure the gateway
address for the router or host com-
puter used as a gateway.
•
Gateway Address:000.000.000.000
Note
❒ Default: 000.000.000.000
❖ Effective Protocol
Select the protocol to use in the
network.
• TCP/IP:Effective/Invalid
Note
❒ Default: TCP/IP: Effective
❖ Ethernet Speed
Set the access speed for networks.
Select a speed that matches your
network environment. [Auto Select]
should usually be selected.
•Auto Select
• 100Mbps Fixed
•10Mbps Fixed
Note
❒ Default: Auto Select
To Next Page
Loading...
Need help?
General
