Error Messages on the Display
23
7
Error Messages on the Display
This section describes the most common network-related messages that appear
on the display. If a message not described here appears, act according to that
message.
Messages without Code Numbers
Reference
Before turning the main power off, see “Turning On the Power”, Copy Ref-
erence.
Message Causes Solutions
hCannot connect to network
Check IP Address
Cannot connect to the net-
work.
Check the machine's IP ad-
dress.
hCannot connect to network
Contact key operator
Cannot connect to the net-
work.
Check the network. If this
message continues to appear,
contact your key operator.
Ethernet Board Error An Ethernet board error has
occurred.
Turn off the main power
switch, and then turn it back
on. If the message continues to
appear, contact your sales or
service representative.
hServer communicat. failed
Contact key operator
Cannot communicate with the
server.
Check the server. If this mes-
sage continues to appear, con-
tact your key operator.
To Next Page
Loading...
