15/06/2012 MP6002/7502/9002 Technical Launch Information
29
3.7.3 SCAN TO FOLDER
Protocol Support: SMB (Server Message Block), FTP (File Transfer Protocol)
Security: Client folder log-in (log-in name and password)
Encryption of log-in name and password during transmission
Resolution: 100dpi, 200dpi (Default), 300dpi, 400dpi, 600dpi
Register client folder
address in HDD:
Max. 2,000 folders
Maintain client folder
address in HDD:
Direct input on operation panel,
WebImageMonitor, SmartNetMonitor
Destination client folder
address input via soft key:
Yes
SMB: Network path -> User account -> Password
FTP: Server -> Network path -> User account -> Password
NCP: Network path -> User account -> Password -> Bindery or
NDS
Search client folder: SMB: Browsing directly to the designated folders
FTP: By client folder name
NCP: Browsing directly to the designated folders
Max. client folder numbers
per send:
Max. 50 client folders / PCs per send
Destination Combination: Please refer to 4.6.4.
Group address: Max. 100 destinations (To Folder: 50, To E-mail: 100) (*1)
e.g. 100 destinations 50 folders included >>>OK
100 destinations 51 folders included>>>Failure
Input Subject: No
Scan File Size: No limitation (Depends on PC HDD and memory.)
File Size when combined
Scan to Folder & Scan to
E-mail:
128 – 102,400kB, Default = 2,048KB (With restriction)
725MB (Without restriction)
(Scan to E-mail file size applied).
File type: Single Page TIFF/JPEG, Single Page PDF, Multi Page TIFF, Multi
Page PDF, High-compression PDF
Program User Setting: Yes (up to 10 programs)
Dividing file in Scan to E-
mail:
Yes (By page or size) / No, Default = Yes(By size)
(When Scan to PC combine with Scan to E-mail)
Resend: Yes / No, Default = Yes
(*1)User can send to max.100 destinations in the same group. But the number of folders
has to be less than 50, since Max folder destinations are 50 .If there are more than 50
folder destinations registered in the group address, a message pops up.
3.7.4 MAXIMUM ADDRESS NUMBERS PER SENDING
Input via Condition 1:
Max.address can
select or input
Condition 2:
Max. address allow in
single operation
Condition 3:
Combination of
addresses: Max.
Scan to
E-mail
Address book 500 500 550
Manual input 100
Scan to
Folder
Address book 50 50
Manual input 50
To Next Page
Loading...
Need help?
General
