1. Press [Stamp Colour] under Stamp Colour.
2. Select the stamp colour, and then press [OK].
Changing the stamp position, size and density
Changes the stamp position, size and density.
1. Press [Change] under Position / Size / Density.
2. Select the stamp position, size, and density, and then press [OK].
User Stamp
Copies a scanned image as a stamp.
Letters or images you use frequently can be registered.
• You have to register a user stamp before using this function.
• You cannot use the bypass tray with this function.
• Only one message can be stamped each time.
Stamp position and original orientation
The user stamp positions differ according to the orientation in which you place the originals.
Stamps
143
To Next Page
Loading...
