6. Copier / Document Server Features
This chapter describes user tools in the Copier / Document Server Features menu.
Accessing User Tools
This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.
• p.214 "Quitting User Tools"
Changing Default Settings
This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Select the menu.
To change the Copier/Document Server Features, press [Copier / Document Server Features].
3. Select the user tool you want to change.
4. Change settings by following instructions on the display, and then press [OK].
213
To Next Page
Loading...
