Reproduction Ratio
This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server
Features.
Default settings are shown in bold type.
Shortcut Reduce/Enlarge
You can register up to three frequently used Reduce / Enlarge ratios other than the fixed Reduce /
Enlarge ratio and have them shown on the initial display. You can also change registered Reduce /
Enlarge ratios.
When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the
number keys.
The default setting for "F1" is 71% (Metric version) / 73% (Inch version).
The default setting for "F2" is 141% (Metric version) / 155% (Inch version).
The default setting for "F3" is 93%.
Reproduction Ratio
Specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the
copier screen.
• Metric version
• 25%
• A3 A5, B4JIS B6JIS (50%)
• A3 8" 13" (65%)
• A3 A4, A4 A5 (71%)
• B4JIS 8" 13" (75%)
• B5JIS A5, B4JIS A4 (82%)
• 93%
• B4JIS A3 (115%)
• 8" 13" A3, A4 B4JIS (122%)
Reproduction Ratio
219
To Next Page
Loading...
