Original: A5 /Copy paper: A4 , Original: A5 /Copy paper A4 , Original: 5
1
/
2
× 8
1
/
2
/
Copy paper: 8
1
/
2
× 11 , or Original: 5
1
/
2
× 8
1
/
2
/Copy paper: 8
1
/
2
× 11
2 repeats (100 %) 8 repeats (50 %) 32 repeats (25 %)
1. Select the size of copy paper and the reproduction ratio.
2. Press [Edit / Colour].
3. Press [Edit Image].
4. Press [Image Repeat].
5. Make sure that [Whole Area] is selected, and then press [OK].
6. Press [OK].
Specified Area Repeat
Repeatedly copies a specified portion of the image.
• You cannot use this function from the ADF.
• If Margin Adjustment is selected, cancel the setting.
To specify the area you want to repeat, you have to define the value of X1, Y1, X2, and Y2 on the original.
Measure the area you want to specify before entering the area settings.
4. Advanced Copying
168
To Next Page
Loading...
