• The reproduction ratios you can specify are 25 - 400%.
• You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of
the image might not be copied or margins will appear on copies.
Specifying the ratio with [ ] and [ ]
Specify a ratio using [ ] and [ ].
1. Press [Reduce / Enlarge].
2. Select a preset ratio which is close to the desired ratio.
3. Adjust the ratio with [ ] and [ ].
Press [ ] or [ ] changes the ratio in increments of 1%. Pressing and holding down [ ] or [ ] changes
it in increments of 10%.
4. Press [OK].
5. Place the originals, and then press the [Start] key.
• To change the value you specified, readjust it with [ ] and [ ].
2. Basic Copying
56
To Next Page
Loading...
