When copying originals of various sizes:
See “Mixed Sizes Mode”.
When placing custom size originals:
See “Custom sizes”.
1. Adjust the document guides to the original size.
2. Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
Type 1 and 2
Type 3 and 4
. Limit mark
. Document guide
• Straighten curls in the originals before placing them on the ADF.
• To prevent multiple sheets from being fed at once, fan the original before placing it on the ADF.
• Set the original squarely.
1. Placing Originals
32
To Next Page
Loading...
