• When an odd number of originals are placed in the ADF, the back of the last page of copied paper
is blank.
• During copying, the image is shifted to allow for the binding margin.
• By default, a binding margin is made on the back side.
• p.221 "Edit"
Originals and copy orientation
You can select the orientation of originals and copies.
• Top to Top
• Top to Bottom
1. Press [Orientation].
2. Select orientation ([Top to Top]/[Top to Bottom]), and then press [OK].
• The default setting is [Top to Top]. You can change the default orientation under Original Orientation
in Duplex Mode and Copy Orientation in Duplex Mode in User Tools. For details, see “General
Features”.
2. Basic Copying
64
To Next Page
Loading...
Need help?
General
