3. Select [1 Sided 2 Sided] or [2 Sided 2 Sided].
To change the original or copy orientation, press [Orientation].
4. Press [OK].
5. Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can specify the margins under Edit in User Tools. For details about Edit, see “Edit”.
• You can use the following copy paper with this function:
• Type 1 and 2
A3 , B4 JIS , A4 , B5 JIS , A5
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 11
• Type 3 and 4
A3 , B4 JIS , A4 , B5 JIS , A5
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 11 , 8
1
/
4
× 14
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5
1
/
2
× 8
1
/
2
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Paper thicker than 169 g/m
2
, 45.5 lb.
• Paper thinner than 60 g/m
2
, 16 lb.
• Postcards
Duplex Copying
63
To Next Page
Loading...
Need help?
General
