3. Press [Regular Size].
4. Select the size of original, and then press [OK] twice.
5. Place the originals, and then press the [Start] key.
Custom sizes
When placing custom size originals in the ADF, specify the size of the originals.
• Paper that has a vertical length of 128 - 297 mm (5.1 -11.6 inches) and a horizontal length of 128
- 1260 mm (5.1 - 49.6 inches) can be placed with this function. However, the size of the copy paper
is limited to 128 - 297 mm (5.1 -11.6 inches) vertically and 128 - 432 mm (5.1 -17 inches)
horizontally.
1. Press [Special Original].
2. Press [Original Size].
3. Press [Custom Size].
Placing Originals
37
To Next Page
Loading...
Need help?
General
