Registering Folders
139
6
F Press [Auth. Info], and then press [TNext].
G Press [Specify Other Auth. Info] on the right side of Folder Authentication.
When [Do not Specify] is selected, the SMB User Name and SMB Password that
you have specified in Default User Name / Password (Send) of File Transfer
settings applies.
H Press [Change] under "Login User Name".
I Enter the login user name, and then press [OK].
J Press [Change] under "Login Password".
K Enter the password, and then press [OK].
L Enter the password again to confirm, and then press [OK].
M Press [Folder].
N Check that [SMB] is selected.
To specify a folder, you can either enter the path manually or locate the folder
by browsing the network.
O Press [Connection Test] to check the path is set correctly.
P Press [Exit].
If the connection test fails, check the settings, and then try again.
Q Press [OK].
To Next Page
Loading...
