Registering Addresses and Users for Scanner Functions
140
6
R Press [Exit].
S Press the {User Tools/Counter} key.
Note
❒ To register the name, see Registering Names”.
❒ You can enter up to 64 characters for the user name.
❒ You can enter up to 64 characters for the password.
❒ You can enter a path using up to 128 characters.
❒ If User Authentication is specified, contact your administrator.
Reference
p.118 “Registering Names”
p.140 “Locating the SMB folder manually”
p.141 “Locating the SMB folder using Browse Network”
Locating the SMB folder manually
This section describes how to locate the SMB folder manually.
A Press [Change] under "Path".
B Enter the path where the folder is located.
C Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit],
and then enter the path again.
Note
❒ Enter the path using this format: “\\ServerName\Share- Name\Path-
Name”.
❒ You can also enter an IPv4 address.
❒ You can enter a path using up to 128 characters.
To Next Page
Loading...
