Ricoh AFICIO MP W5100 - Page 190

Protocol Port Setting Method Disabled Condition
HTTPS TCP:443
• Web Image Monitor
• telnet
Functions that require
HTTPS cannot be used.
@Remote functions are
unavailable.
You can also make
settings to require SSL
transmission and restrict
the use of other
transmission methods
using the control panel
or Web Image Monitor.
SMB TCP:139
• Control Panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Web
SmartDeviceMonitor
SMB printing functions
cannot be used.
NBT
UDP:137
UDP:138
• telnet
SMB printing functions
via TCP/IP, as well as
NetBIOS designated
functions on the WINS
server cannot be used.
SNMPv1,v2 UDP:161
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Web
SmartDeviceMonitor
Functions that require
SNMPv1, v2 cannot be
used.
Using the control panel,
Web Image Monitor or
telnet, you can specify
that SNMPv1, v2
settings are read-only,
and cannot be edited.
5. Enhanced Network Security
188
5