4. Press [Program / Change Administrator].
5. In the line for the administrator you want to change, press [Administrator 1], [Administrator
2], [Administrator 3] or [Administrator 4], and then press [Change].
6. Press [Change] for the setting you want to change, and re-enter the setting.
7. Press [OK].
8. Press [OK] twice.
You will be logged off.
9. Press the [User Tools/Counter] key.
• p.37 "Logging on Using Administrator Authentication"
• p.39 "Logging off Using Administrator Authentication"
Using Web Image Monitor
Using Web Image Monitor, you can log on to the machine and change the administrator settings. This
section describes how to access Web Image Monitor.
For details about Web Image Monitor, see Web Image Monitor Help.
1. Open a Web browser.
2. Authentication and its Application
42
To Next Page
Loading...
