If User Authentication is Specified
When user authentication (Basic Authentication, Windows Authentication, LDAP Authentication, or
Integration Server Authentication) is set, the authentication screen is displayed. Unless a valid user name
and password are entered, operations are not possible with the machine. Log on to operate the machine,
and log off when you are finished operations. Be sure to log off to prevent unauthorized users from using
the machine. When auto logout timer is specified, the machine automatically logs you off if you do not use
the control panel within a given time. Additionally, you can authenticate using an external device. For
details about using an external device for user authentication, see “Authentication Using an External
Device”.
• Consult the User Administrator about your login user name, password, and user code.
• For user code authentication, enter a number registered in the Address Book as [User Code].
• p.107 "Authentication Using an External Device"
User Code Authentication (Using the Control Panel)
When User Code Authentication is set, the following screen appears.
Enter a user code (up to 8 digits), and then press the [OK] key.
• To log off, do one of the following:
• Press the Operation switch.
• Press the [Energy Saver] key after jobs are completed.
• Press the [Clear/Stop] key and the [Reset] key at the same time.
If User Authentication is Specified
97
To Next Page
Loading...
