Ricoh Aficio SP 8200DN - Page 151

11. Press the [ ] or [ ] key to change the registered value (mm).
Increase the value to shift the print area in the direction indicated by the "+" symbol in the diagram
below. Decrease to shift the print area in the direction indicated by the "-" symbol.
BEK101S
): Print Area
): Paper Feed Direction
12. Press the [OK] key to return to the [Registration] menu.
13. Print the test sheet to confirm the adjustment result.
14. Press the [Menu] key.
The display returns to the initial screen.
Adjusting Printing Position
149
8