• Before using the board, you must configure settings from the printer control panel. For details, see
"Wireless LAN Configuration".
• p.64 "Wireless LAN Configuration"
Installing the IEEE 1284 Interface Board
• Before beginning work, ground yourself by touching something metal to discharge any static
electricity. Static electricity can damage the board.
• Do not subject the board to physical shocks.
• For connection to the IEEE 1284 interface board, use a half pitch 36-pin interface cable.
1. Check the contents of the package.
1. IEEE 1284 Interface Board
2. Turn the printer off and unplug the power cord.
Installing the Interface Units
43
To Next Page
Loading...
Need help?
General