Installing the Interface Units
Installing the Gigabit Ethernet Board
• Before beginning work, ground yourself by touching something metal to discharge any static
electricity. Static electricity can damage the board.
• Do not subject the board to physical shocks.
• The printer's Ethernet and USB ports are not available when the Gigabit Ethernet board is attached
to the printer. Use the Ethernet and USB ports on the Gigabit Ethernet board.
1. Check the contents of the package.
1. Gigabit Ethernet Board
2. Protective Caps (one each for the Ethernet port and the USB port)
3. Ferrite Core
Use the included ferrite core when connecting an Ethernet cable to the board.
2. Turn the printer off and unplug the power cord.
Installing the Interface Units
37
To Next Page
Loading...
Need help?
General