The bridge unit and the 1000-sheet paper feed unit or 2000-sheet paper feed unit must have been
attached.
To attach this option, contact your sales or service representative.
9. Install the punch unit in the 2 tray finisher
To attach this option, contact your sales or service representative.
10. Attach the output jogger unit to the 2 tray finisher
To attach this option, contact your sales or service representative.
Where to Install Options
Install options in the locations shown in the following illustrations.
External options
1. 1000-sheet paper feed unit
Attach to the underside of the printer. See “Attaching the Paper Fed Unit”.
2. 2000-sheet paper feed unit
Attach to the underside of the printer. See “Attaching the Paper Fed Unit”.
3. 1200-sheet paper feed unit
Attach to the right side of the 1000-sheet paper feed unit or 2000-sheet paper feed unit.
To attach this option, contact your sales or service representative.
4. Bridge unit
Remove the output tray and attach the bridge unit.
2. Installing Options
22
To Next Page
Loading...
Need help?
General