SC 4xx (Image Transfer and Transfer Error)
445
ITB (Image Transfer Belt) Unit: Home Position Error
• The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the
ITB unit initialization has been done.
ITB (Image Transfer Belt) Unit: Contact Position Error
• The ITB contact sensor does not detect the contact position of the ITB for 5 seconds after
the ITB unit has moved to the contact position.
ITB (Image Transfer Belt) Unit: No-contact Position Error
• The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the
ITB unit has moved to no-contact position.
• Defective ITB contact motor
• Defective ITB contact sensor
• Defective ITB unit
1. Replace the ITB contact motor.
2. Replace the ITB contact sensor.
3. Replace the ITB unit.
480
Agitator Motor Error
The agitator motor error is detected twice for 10 msec during the initialization at power-on or
after the cover is closed.
• Disconnected or defective harness
• Defective agitator motor
1. Check or replace the harness.
2. Replace the agitator motor.
Service Call Conditions
17