Machine level
Front to back: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level
Machine Space Requirement
Put the printer near the power source with these clearances:
Right side [A]:
Front [B]:
Left side [C]:
Rear [D]:
Over 10 cm (4.0")
Over 70 cm (27.5")
Over 20 cm (7.9")
Over 10 cm (4.0")
Power Requirements
• Make sure that the plug is tightly in the outlet.
• Avoid multi-wiring.
• Make sure that you ground the printer.
Input voltage level
120 V, 60 Hz: More than 11 A (for North America)
220 V to 240 V, 50 Hz/60 Hz: More than 6 A (for Europe/ Asia)
Permitted voltage fluctuation: 10%
2. Installation
16
To Next Page
Loading...
