3. Paper Feed Roller × 3
See "Replacing the Paper Feed Roller".
4. Fusing Unit
See "Replacing the Fusing Unit".
Replacing the Friction Pad
Replace all the friction pads in the tray. The following procedure shows how to replace the tray's friction
pad (Tray 1) and the other are for the paper feed unit(s) (Tray 2, 3).
1. Pull out the paper tray until it stops.
2. Lift the front side of the tray, and then pull it out of the printer.
Replacing the Maintenance Kit
113
To Next Page
Loading...
