Ricoh Aficio SP4100N - Page 36

3. Remove the two screws and the cover of the IEEE 802.11b interface unit mounting bracket.
AUB210S
The removed cover is not used when installing the IEEE 802.11b interface unit. Keep it for possible
future use.
4. Attach the IEEE 802.11b interface unit.
Insert the end of the IEEE 802.11b interface unit into the slot.
AUB213S
5. Fasten the IEEE 802.11b interface unit to the controller board with the two screws.
AUB240S
Check the IEEE 802.11b interface unit is connected firmly to be controller board.
2. Installing Options
34
2