Why is the display off on my Ricoh All in One Printer?
There are several reasons why the display of your Ricoh All in One Printer might be off: * The screen contrast knob might be turned to the dark position. Adjust the screen contrast knob to the light position. * The machine could be in Energy Saver mode. Press the {Energy Saver} key to exit Energy Saver mode. * The operation switch might be off. Turn on the operation switch.
What to do if nothing happens when I turn on the operation switch on my Ricoh All in One Printer?
If nothing happens when you turn on the operation switch of your Ricoh All in One Printer, the main power switch is likely turned off. Turn on the main power switch.
What to do if I cannot switch screens on my Ricoh Afico 3030 All in One Printer?
If you can't switch to another screen by pressing the {Facsimile} or {Scanner} key on your Ricoh All in One Printer, it means that functions other than the copier function are not yet ready. Wait a little longer.
Why are items missing from the User Tools menu on my Ricoh Afico 3030 All in One Printer?
If the User Tools menu on your Ricoh All in One Printer is missing items after turning on the machine, it indicates that functions other than the copier function are not yet ready. The time required varies by function. The functions will appear in the User Tools menu when they are ready for use, so wait a little longer.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed (Black) | 30 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 30 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Maximum Paper Size | A3 |
| Duplex Printing | Yes |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac |
To Next Page
