Copier Functions
63
2
D Select the message number.
E Press [All Pages] or [1st Page Only] to
select the print page.
Note
❒ You can change the position,
size, and density of the stamp.
See p.63 “To change stamp posi-
tion, size, and density”.
F After you have specified all nec-
essary settings, press [OK].
G Press [OK] twice.
H Place originals, and then press the
{Start} key.
To change stamp position, size, and
density
A Press [Change].
B Select the position for print, size,
and density, and then press [OK].
User Stamp
Prints a registered stamp onto copies.
Preparation
You have to register a user stamp
before using this function. See p.64
“To program the user stamp”.
Stamp position and original orientation
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
❒ You can combine this function
with only one Preset Stamp.
Reference
Related default settings:
p.102 “Stamp Position 1 - 4”
p.103 “Stamp Format 1 - 4”
GCSTMP0E
GCSTMP6E
To Next Page
Loading...
