Copying
58
2
Erase
This function erases the centre
and/or all four sides of the original
image.
This function has three modes:
❖ Border
Erases the original's edge margin
from the copy.
❖ Centre
Erases the original's centre margin
from the copy.
❖ Centre/Border
Erases both the original's centre
and edge margins from the copy.
Reference
The erase width is set to 10 mm
(0.4”) as default. You can
change this setting with User
Tools.
p.99 “Erase Centre Width”
p.99 “Erase Border Width”
Note
❒ The relationship between original
orientation and erased area is as
follows:
❒ 1: Erased part
❒ 2: 2–99 mm (0.1”–3.9”)
GCCENT2E
GCCENT1E
L original K original
GCCENT3E
To Next Page
Loading...
