Ricoh Afico 3030 - Page 109

Settings You Can Change with User Tools
99
4
❖ Front Margin: Left/Right
You can specify left and right mar-
gins on the front side of copies us-
ing the Margin Adjustment
function.
Note
❒ Default:
•Metric version: Left 5 mm
• Inch version: Left 0.2"
❖ Back Margin: Left/Right
You can specify left and right mar-
gins on the back side of copies us-
ing the Margin Adjustment
function.
Note
❒ Default:
•Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ Front Margin: Top/Bottom
You can specify top and bottom
margins on the front side of copies
using the Margin Adjustment
function.
Note
❒ Default:
•Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ Back Margin: Top/Bottom
You can specify top and bottom
margins on the back side of copies
using the Margin Adjustment
function.
Note
❒ Default:
•Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ 1 Sided→2 Sided Auto Margin: TtoT
When using the 1 sided → 2 sided
Duplex function, you can specify
margins on the back side.
The margin is set to the same value
as “Back Margin: Left/Right”.
Note
❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ 1 Sided→2 Sided Auto Margin: TtoB
When using the 1 sided → 2 sided
Duplex function, you can specify
margins on the back side. The mar-
gin is set to the same value as
"Back Margin: Top/Bottom".
Note
❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖ Erase Border Width
You can specify the width of
erased border margins using this
function.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❖ Erase Original Shadow in Combine
In Combine Copy or Book-
let/Magazine Copy mode, you can
specify whether to erase a 3mm,
0.1" bounding margin around all
four edges of each original.
Note
❒ Default: Yes
❖ Erase Centre Width
You can specify the width of the
erased centre margins using this
function.