Supplementary Specifications
113
5
• When using this function, the following limitations apply. When the
number of copies exceeds tray capacity, copying stops. When this hap-
pens, remove copies from the shift tray, and then resume copying.
*1
To load paper of sizes 7
1
/
4
" × 10
1
/
2
"L, 8" × 10"KL, 11" × 15"L, 10" × 14"L,
and 10" × 15"L, use paper tray 2.
• In the following cases, copies are delivered to the shift tray without sta-
pling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When the number of copies exceeds tray capacity, copying stops. If this
happens, remove the copies from the shift tray, and then resume copy-
ing.
• You cannot change stapling positions during copying.
• When the original image is rotated, staple orientation changes by 90°.
• The maximum original image size that can be rotated is as follows:
• When using [Left 2] or [Top 2] with the Combine function, Double Copies,
or Auto Reduce/Enlarge, the "
Blank part will appear. Check ori-
entation.." message may appear. If this happens, change the paper ori-
entation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
Paper size Stapler capacity
500-sheet finisher A3L, B4 JISL, 11" × 17"L,
11" × 15"L, 11" × 14"L,
10" × 14"L, 10" × 15"L,
8
1
/
2
" × 14"L, 8
1
/
2
" × 13"L
20 sheets (80 g/m
2
)
A4KL, B5 JISK,
8
1
/
2
"
×
11"
KL
, 8"
×
10
1
/
2
"
K
,
8" × 10"K, 7
1
/
4
" × 10
1
/
2
"K
30 sheets (80 g/m
2
)
1000-sheet finisher A3L, B4 JISL, 11" × 17"L,
11" × 15"L, 11" × 14"L,
10" × 14"L, 10" × 15"L,
8
1
/
2
" × 14"L, 8
1
/
2
" × 13"L,
8
1
/
4
" × 14"L, 8
1
/
4
" × 13"L,
8" × 13"L
30 sheets (80 g/m
2
)
A4KL, B5 JISKL,
8
1
/
2
"
×
11"
KL
, 8"
×
10
1
/
2
"
KL
,
8"
×
10"
KL
, 7
1
/
4
"
×
10
1
/
2
"
KL
50 sheets (80 g/m
2
)
Metric version A4
Inch version
8
1
/
2
" × 11"
To Next Page
Loading...
