Copying from the Bypass Tray
29
2
When copying onto custom size
paper
A Press the {#} key.
B Press [Custom Size].
C Enter the vertical size of the pa-
per using the number keys,
and then press [#].
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz.] is not highlighted,
press [Horiz.].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the {#} key.
B Select the paper type in Special
paper.
C Press [OK].
F Place originals, and then press the
{Start} key.
Note
❒ When copying onto OHP trans-
parencies, remove copies one by
one.
❒ When setting OHP transparen-
cies, thin paper, or adhesive la-
bel paper, Staple, Shift, or Sort
functions cannot be used.
G When your copy job is finished,
press the {Clear Modes} key to
clear the settings.
To Next Page
Loading...
