Specifications
83
7
Specifications
Mainframe
❖ Configuration:
Desktop
❖ Print Process:
Laser beam scanning & Electrophotographic printing
Dual component toner development
❖ First Print Speed:
7.5 sec or less (A4K, 8
1
/
2
×11K)
Note
❒ If the printer has not been used for a while, there may be a short delay be-
fore the first page starts printing.
❖ Printing Speed:
Maximum 35 pages per minute (A4L, 8
1
/
2
× 11L)
Note
❒ Continuous printing on sheets with a width of 230 mm or smaller may de-
crease the printing speed depending on the temperature control of the fus-
ing unit.
❖ Interface:
Standard 36-pin printer cable and a parallel port on the host computer
IEEE 1284 I/F (Compatible, ECP, Nibble)
• Do not use a cable more than 2.5 meters (8.2 feet) long.
•USB 2.0
• Bidirectional IEEE1284
• 10/100Base-TX
❖ Resolution:
1,200 × 1,200 dpi (PCL 6, RPCS, PS, PDF)
600 × 600 dpi (PCL 6, PCL 5e, RPCS, PS, PDF)
300 × 300 dpi (PCL 5e, PDF)
❖ Printer Language:
PCL 6 (XL) , PCL 5e, RPCS, Adobe PostScript 3
❖ Fonts:
PCL 6, PCL 5e
Agfa Monotype 35 Intellifonts, 10 TrueType fonts, 13 International fonts, and
1 Bitmap font.
PostScript, PDF
136 fonts (Type 2:24, Type 14:112)
KirP4GB_Mainte-F6_FM_forPaper.book Page 83 Thursday, May 12, 2005 11:48 AM
To Next Page
Loading...
