Ricoh Caplio R1 - Disconnecting the Camera from Your Computer

120
4. Browse to the folder where the WIA driver was installed (by
default this should be C:\Program Files\CaplioSoftware\WIA
driver) and then select [Next].
The WIA Driver is installed.
The [Caplio R1/RZ1] screen appears.
5. Select [RICOH Gate La], check
[Always use this program for this
action] check box, and then click
[OK].
To load images from the camera with assistance from the Windows XP
Scanner and Camera Wizard, select [Scanner and Camera Wizard].
Leaving the [Always use this program for this action] check box
unchecked will cause the [Caplio R1/RZ1] screen to be displayed each
time you transfer images from the camera, thereby allowing you to
choose whether to use RICOH Gate La or the Scanner and Camera
Wizard for image transfers.
Disconnecting the Camera from Your Computer:
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
Note
It is recommended that you use the AC Adapter (sold separately) when you are downloading
images from your camera.